44 Faxing: Advanced Operations
OKIFAX 5600 Plus: Press the No
ᮣ
key. The display
shows FEEDER TX. Press the Yes ᮤ key.
10 Select a location. Refer to the following instructions.
To Select Using Do This
A One Touch key Press the One Touch key. (On the
OKIFAX 5600 Plus, lift the main One
Touch keypad to access One Touch keys
16–30.)
An Auto Dial number Press the Auto Dial key, then enter the
two-digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal
the numeric keypad telephone.
11 Press the Start key. Your OKIFAX begins waiting for
the time and date you have set before feeding the
document and sending the fax.
Sending a Delayed Fax From Memory
1 Load your documents.
2 Press the Select Function key.
3 Press the 1/Delayed TX One Touch key. The display
shows DELAYED TX and today’s date.
4 If the transmission is to occur on the same day, skip
to step 6. Otherwise, press the No
ᮣ
key. The
display shows PRG. START DATE 0-9.
5 Using the numeric keypad, enter the date you wish
the transmission to begin—up to three days in
advance.
6 Press the Yes ᮤ key. The display shows PRG. START
TIME 0-9.
7 Using the numeric keypad, enter the time you wish
the transmission to begin, in 24-hour format—8:00
AM is 08:00; 8:00 PM is 20:00.
8 Press the Yes ᮤ key. The display shows FEEDER TX
(OKIFAX 5300 Plus) or BROADCAST/MEMORY TX (OKIFAX
5600 Plus).
9 OKIFAX 5600 Plus: Press the Yes ᮤ key.
OKIFAX 5300 Plus: Press the No
ᮣ
key. The display
shows BROADCAST/MEMORY TX. Press the Yes ᮤ
key.
10 Select a location. Refer to the instructions below.
To Select Using Do This
A One Touch key Press the One Touch key. (On the
OKIFAX 5600 Plus, lift the main One
Touch keypad to access One Touch keys
16–30.)
An Auto Dial number Press the Auto Dial key, then enter the
two-digit Auto Dial number on the
numeric keypad.
A number dialed on Dial as you would on a normal telephone.
the numeric keypad
A group Using the numeric keypad, press the #
key, then enter the number of the group
you want to use.
11 Press the Yes ᮤ key to confirm your selection. The
display shows SELECT LOCATION(S).
