Introduction 13
Signal Tones
Your OKIFAX makes a number of sounds to inform
you of specific conditions.
Key Select tone: This is a short beep that occurs each
time you press a key.
Error tones: If you press a wrong or inappropriate key,
your OKIFAX emits three short beeps. If it experi-
ences a problem during communications, it emits
three long beeps. Press the Stop key to turn the er-
ror tone off, then print a Message Confirmation Re-
port to check the source of the problem—to do this,
press the Copy key twice with no documents loaded.
Voice Request tone: During a fax session, either you or
the person at the remote fax machine may initiate a
voice request. When the person at the remote ma-
chine either initiates or answers your voice request,
your OKIFAX emits a repetitive warbling sound.
End of Session tone: At the end of every successful fax ses-
sion, your OKIFAX emits a short beep to inform you
that there were no errors or problems in the communi-
cation.
Off-Hook Alarm tone: If it is equipped with the optional
handset, and if the handset is left off the hook, your
OKIFAX emits an intermittent warbling sound. To turn
off the sound, hang up the handset and press the Stop
key.
