A SERVICE OF

logo

Open as PDF
next previous
60
4. Using the Viewer
❷ Projecting images stored in a USB memory device
ThissectionexplainsthebasicoperationoftheViewer.
TheexplanationprovidestheoperationalprocedurewhentheViewertoolbar(→page64)issettothefactoryde-
fault.
-StartingtheViewer .......................................................................below
-RemovingtheUSBmemoryfromtheprojector ....................... page62
-ExitingtheViewer..................................................................... page62
Preparation:BeforestartingtheViewer,storeimagestotheUSBmemoryusingyourcomputer.
WIRELESS
WIRELESS
Starting the Viewer
1. Turnontheprojector.(→page16)
2. InserttheUSBmemoryintotheUSBportoftheprojec-
tor.
• DonotremovetheUSBmemoryfromtheprojectorwhile
it’s LED flashes. Doing so may corrupt the data.
3. PresstheSOURCEbuttonontheprojectorcabinet.
The Viewer start screen will be displayed.
• PresstheVIEWERbuttonontheremotecontrol.