NEC Electronics America M260WS Manual

A SERVICE OF

next previous

16

2. Projecting an Image (Basic Operation)

Standby Blinking PowerOn

Steady orange light Blinking blue light Steady blue light

 Turning on the Projector

1. Uncoverthelensby sliding thelens cover(M350X/

M300X/M260X/M230X/M300W/M260W/M420X/M420XV)

orremovingthelenscap(M350XS/M300XS/M260XS/

M300WS/M260WS)

 [M350XS/M300XS/M260XS/M300WS/M260WS]

• Donot removethelens capbypulling onthe string.

Doing so can cause mechanical damage to the part

around the lens.

2. Pressthe (POWER)buttonontheprojectorcabinet

orthePOWERONbuttonontheremotecontrol.

The POWER indicator will turn to blue and the projector

will become ready to use.

TIP:

• Whenthemessage“Projectorislocked!Enteryourpassword.”

isdisplayed,itmeansthatthe[SECURITY]featureisturnedon.

(→page32)

After you turn on your projector, ensure that the computer

or video source is turned on and that the lens cover is

open.

NOTE:Whennoinputsignalispresent,theno-signalguidanceis

displayed(factorymenusetting).

(→page127)

Lens cover

Lens cap