NEC Electronics America M260WS Manual

next previous

2. Projecting an Image (Basic Operation)

 Correcting Keystone Distortion Manually

Ifthescreenistiltedvertically,keystonedistortionbecomeslarge.AutomaticKeystoneCorrection(AUTOKEYSTONE)

functionisturnedonatthetimeofshipment.Tocorrectkeystonedistortionmanually,proceedwiththefollowingsteps

tocorrectkeystonedistortion.

NOTE:

• TheKeystonecorrectioncancauseanimagetobeslightlyblurredbecausethecorrectionismadeelectronically.

• TheKeystonecorrectionrangecanbemadenarrower,dependingonasignaloritsaspectratioselection.

• YoumaynotgetthedesiredresultfromtheAutoKeystonecorrection,dependingonthepositionofthezoomlever.Ifthishap-

pens,performtheKeystonecorrectionmanually.

Adjusting with buttons on the cabinet

1. Pressthe or buttonwithnomenusdisplayed.

 Thekeystonebarwillbedisplayed.

2. Usethe or tocorrectthekeystonedistortion.

 Thekeystonebarwillbeclosedafteraperiodoftime.

3. PresstheENTERbutton.

 Thekeystonebarwillbeclosed.

NOTE:

• Whenthemenuisdisplayed,theaboveoperationisnotavailable.Whenthemenuisdisplayed,presstheMENUbuttontoclose

themenuandstarttheKeystonecorrection.

 Fromthemenu,select[SETUP]→[GENERAL]→[KEYSTONE].Thechangescanbesavedwith[KEYSTONESAVE].(→page

81)

• KeystonecontrolisnotavailablewiththeorbuttonwhenVIEWERisused.