30
CARDIO CONSOLE CODES
General Information:
• Press the UP Speed/Load key [
], the numeric [ # ] key, and then press the [ENTER] key once to enter this mode.
Pressing [] or [] forwards or backs up through the selections. Pressing [ENTER] then selects that item. Enter
values then press the [ENTER] key again to store the value.
• Once in console codes mode, pressing [
] [] forwards or backs up through the selection, pressing [ENTER] then
selects that item. Pressing [CLEAR] exits any of the special access modes.
• Pressing [CLEAR] twice will exit the Console Service Mode.
Workout Default Console Codes:
[] [ 2 ] [ ENTER ] “DEFAULTS”
[] [ ENTER ] “ENTER WT XXX”
[] [ ENTER ] “ENTER LEVEL 1 TO 20”
[] [ ENTER ] “ENTER TIME 5 TO 99”
[] [ ENTER ] “ENTER AGE 10 TO 99”
[] [ ENTER ] “CHR PERCENT XX”
[] [ ENTER ] “ENTER SPEED XX.X”
[] [ ENTER ] “QUICK SPEED XX.X”
[] [ 3 ] [ ENTER ] “CUSTOMIZE”
[] [ ENTER ] “MAX TIME”
[] [ ENTER ] “COOL DOWN”
[] [ ENTER ] “CHANGE UNITS”
[] [ ENTER ] “HR INPUTS”
[] [ ENTER ] “SELECT STATS”
[] [ ENTER ] “LANGUAGE”
[] [ ENTER ] “UPPER CONTRAST ADJ”
[] [ ENTER ] “LOWER CONTRAST ADJ”
[] [ ENTER ] “MAX SPEED”
[] [ ENTER ] “ENABLE MAG KEY”
[] [ ENTER ] “AUTO STOP”
[] [ ENTER ] “SET DEFAULTS“
[] [ 4 ] [ ENTER ] “MACHINE STATUS”
[] [ ENTER] “ RUN HOURS”
[] [ ENTER ] “ WORKOUTS”
[] [ ENTER ] “ DISTANCE”
[] [ ENTER ] “ CONSOLE VERSION” “Displays Console Version #”
[] [ ENTER ] “DEVICE TYPE” ”Displays Machine Type”
[] [ ENTER ] “ TM DRIVE VER”
[] [ ENTER ] “ MAINT HOURS”
NOTE: SEVERAL CODES MAY BE INCLUDED IN THE
CONSOLE CODES LIST THAT DO NOT APPLY
TO THE TREADCLIMBER
®
FUNCTIONS.
