Adjusting the color purity
Your television has a large screen picture tube, _,nd its color purity
can be affected slightly by the earth's magnetic f:_eld. For best
results, follow the instructions below to adjust the color purity.
O Turn off the TV set.
Select the desired location and install the set. Determine the
compass direction where the set is facing. Tile direction is
determined from the front of the screen facing forward.
O Set the DIRECTION switch according to the chart below.
TV SET DIRECTION
North
North East
North West
South
South East
South West
East
West
DIRECTION SWITCH
S NEUTRAL N
X
X
X
X
X
X
X
X
STRENGTH SWITCH
Turn the TV on, and check the color perfol:mance.
If color impurity is still present, change the STRENGTH
switch to position "1." If there is still ir_purity, wait a few
minutes, then press the DEGAUSS bu'_ton.
The color purity switches must be adjusted each time the set
is moved to a new location.
If there is still color impurity after adjusting the switches,
contact your Mitsubishi dealer or a Mitsubishi Authorized
Warranty Service Center.
43
