TV + audio system
equipment you will need
To hook up an audio system, you will need:
• One set of RCA pin audio cables.
procedure
O Connect the audio cables to the
AUDIO MONITOR OUTPUT
terminals on the back of the TV.
Use the red cable to connect the
right (R) channel and the white
cable to connect the left (L) channel.
Connect the other ends of these cables to the AUX IN
terminals on the back of the audio system.
O
Turn off the television's speakers. To do this, press the
AUDIO function button on the remote control until you see
the "Speaker" display. Set the speakers to "Off" by pressing
the adjust (up/down) buttons. See "Adjusting the sound," on
page 62.
O Set the audio system's input to the "AUX" position.
White Lead
[_- Red Lead O
Audio System Rear Terminals
AUX
- White Lead
Red Lead
TV Rear Terminals
(75P)
0
_0
Basic Connections 37
