SETUP
JBL Synthesis
3-54
VOLUME CONTROL SETUP
Selecting the SETUP menu VOLUME CONTROLS option opens the VOLUME CONTROL SETUP menu shown below, which can be used to
configure Main Zone and Zone 2 volume levels.
VOLUME CONTROLS
SETUP
Default Possible
Parameter Setting Settings
MAIN PWR ON -30dB LAST LVL, -80 to +6dB
MUTE LEVEL
FULL MUTE FULL MUTE, -40dB, -30dB, -20dB,
-10dB
ZONE PWR ON -30dB LAST LVL, -80 to +6dB
MAIN PWR ON LAST LVL, -80 to +6dB
Sets the Main Zone volume level that will be selected whenever the
Main Zone is activated. When set to LAST LVL, the Main Zone will
activate at the last volume level that was selected in that zone
during the previous operating session.
MAIN PWR ON
MUTE LEVEL FULL MUTE
MUTE LEVEL FULL MUTE, -40dB, -30dB, -20dB, -10dB
Sets the amount of attenuation that occurs in the Main Zone
whenever the front panel or remote control Mute button is
pressed. When set to FULL MUTE, Main Zone volume level will be
fully attenuated whenever the front panel or remote control Mute
button is pressed. Otherwise, Main Zone volume level will be
attenuated to the selected level.
ZONE PWR ON LAST LVL, -80 to +6dB
Sets the Zone 2 volume level that will be selected whenever
Zone 2 is activated. When set to LAST LVL, Zone 2 will activate at
the last volume level that was selected in that zone during the
previous operating session.
ZONE PWR ON
