CUSTOM SETUP
FRONT L/R 80Hz
CENTER 80Hz
SIDE L/R 80Hz
REAR L/R 80Hz
SUBWOOFER 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
SETUP
JBL Synthesis
3-30
Note:
When the SIDE L/R parameter is set to NONE, Dolby
Digital Surround EX, THX Ultra2, THX Surround EX ,
and dts-ES decoding are not available.
SIDE L/R FULL, 30Hz to 120Hz, THX 80Hz, NONE
Opens the SIDE L/R SPEAKERS menu shown above, which can be
used to select a crossover point for the Main Zone audio output
connectors labeled Side L/R. When set to FULL, the SDP-5 sends a
full-range audio output signal to these connectors. Otherwise, the
SDP-5 activates a crossover point at the selected setting. Choose
the setting closest to the low-frequency rating of the associated
speakers.
When set to NONE, the SDP-5 redirects side channel signals to the
Main Zone audio output connectors labeled Rear L/R. If the
CUSTOM SETUP menu REAR L/R parameter is also set to NONE, the
SDP-5 redirects surround channel signals to the Main Zone audio
output connectors labeled Front L/R.
SIDE L/R
