SNMP trap destination list must have a trap daemon to listen to those traps.
IPX/SPX parameters for Telnet
Telnet Parameter Description and Values
ipx-config
Enables or disables IPX/SPX protocol operation on the print server:
0 Disables.
1 (default) Eenables.
ipx-unitname
A user-assigned alphanumeric name assigned to the print server (31 characters maximum). By
default, the name will be NPIxxxxxx, where xxxxxx are the last six digits of the hardware
address (MAC or LAN address).
Address
(read-only parameter) Identifies the IPX network and node numbers detected on the network, in
the form NNNNNNN:hhhhhhhh (hexadecimal), where NNNNNNNN is the network number and
hhhhhhhh is the hardware address (MAC or LAN address) of the print server.
ipx-frametype
Specifies the IPX frame type setting, one of the following: AUTO (default), EN_SNAP,
EN_8022, EN_8023, EN_II, TR_8022, TR_SNAP.
ipx-sapinterval
Specifies the time interval (1–3600 seconds) that the print server waits between Service
Advertising Protocol (SAP) broadcasts on the network. The default is 60 seconds. 0 disables
SAP broadcasts.
ipx-nds-tree
An alphanumeric string, up to 31 characters, that specifies the name of the Novell Directory
Services (NDS) tree for this print server.
ipx-nds-context
An alphanumeric string, up to 256 characters, that specifies the NDS context for the print
server.
ipx-job-poll
Specifies the time interval (1–255 seconds) that the print server will wait to check for print jobs
in a print queue. The default is 2 seconds.
ipx-banner
Enables or disables printing an IPX banner page using the Printer Job Language (PJL):
0 Disables.
1 (default) Enables.
ipx-eoj
Enables or disables IPX end-of-job notification using PJL:
0 Disables.
1 (default) Enables.
