Installing the print server
for HP Jetdirect 175x external print server/Internet connector for USB
and HP Jetdirect 310x external print server/Internet connector for
USB
Overview
1. Install hardware
Summary: To connect the printer to the network using
the 175x or 310x print server, you will:
connect the print server to the network with a
network cable,
●
connect the print server to the printer with the
included USB cable,
●
plug in the power adapter, and●
print a configuration (self-test) page.●
Here are the detailed instructions.
2. Install software
For the basic procedure to set up each Windows (95, 98,
2000, XP, ME, NT 4.0) computer for printing on the networked
printer:
This default procedure involves installing printer drivers and
other software and configuring network parameters. You will
use the installation software on either the CD-ROM supplied
with your printer or on the Jetdirect CD-ROM supplied with
your print server, depending on your printer model.
Here are the instructions.
●
For the LPR/LPD (Line Printer Daemon) alternative printing
method...
●
For Macintosh setup (MacOS 8.6 or later), read the Jetdirect
CD-ROM on a Macintosh system, select the file Network
Printing.htm, and follow the instructions for setting up network
printing.
●
