17
9900B (TCAD) Symbols
TRFC (White)—Altitude separa-
tion >500 feet, steady altitude
separation
TA (Yellow)—Altitude separa-
tion £500 feet, steady altitude
separation
TRFC (White)—Altitude separa-
tion >500 feet, closing
PA (White)—Altitude separa-
tion £500 feet, opening
TRFC (White)—Altitude separa-
tion >500 feet, opening
TA (Yellow)—Altitude separa-
tion £500 feet, closing
9900BX (TCAS) Symbols
Traffic Advisory
Proximity Advisory
Other Traffic
Out-of-Range Traffic Advisory
Configuring TCAD Data on the Map Page
Thedisplayoftrafcinformationcloselyresembles
thedisplaysymbologyusedbytheRyanTCAD.Traf-
fic data is only displayed on the Map Page if head-
ing data is available.
You can configure TCAD data on the Map
Page using the Map Setup Menu.
To configure Traffic on the Map Page:
1. Turn the small right knob to select the Map
Page.
2. Press MENU to display the Page Menu.
3. Use the small right knob to select “Setup
Map?” and press ENT.
4. The flashing cursor highlights the GROUP field.
Turn the small right knob to display the Map
Setup Options Menu. Turn the small right
knob to select Traffic and press ENT.
5. Turn the large right knob to select the desired
Traffic Mode option. Turn the small right knob
to select the desired option and press. Repeat
the step for Traffic Symbol and Traffic Label.
6. Return to the Map Page by pressing CLR.
TheMapPagehastheabilitytodisplaytrafcin
athumbnailformatinanyofthetopthreeelds(top
foureldsona500WSeriesunit)ontheright-hand
190-00356-31 Rev. C
Section 4
Ryan TCAD Interface
