1414
190-00356-31 Rev. C
thetopthreedataelds(topfoureldsonthe500W
Series)ontherightsideoftheMapPage.
When a Traffic Advisory is active, the “Traffic”
banner is displayed in the lower right corner
of the Map Page.
To display Thumbnail Traffic on the Map Page
1. Turn the small right knob to select the Map
Page.
2. Press MENU to display the Page Menu.
3. Turn the small right knob to select ‘Change
Fields?’ and press ENT.
4. Select one of the top three fields (top four
fields on the 500W Series). Select TRFC from
the Select Field Type List and press ENT. Note
that the thumbnail range defaults to 6 NM and
cannot be changed.
Highlighting Traffic Data Using Map Panning
Anothermappagefunctionispanning,which
allowsyoutomovethemapbeyonditscurrentlimits
withoutadjustingthemapscale.Whenyouselect
thepanningfunction—bypressingthesmall right
knob—atargetpointerflashesonthemapdisplay.A
windowalsoappearsatthetopofthemapdisplay
showingthelatitude/longitudepositionofthepointer,
plusthebearinganddistancetothepointerfromyour
presentposition.
When the target pointer is placed on traffic,
the traffic range and altitude separation are
displayed.
To select the panning function and pan the
map display:
1. Press the small right knob to activate the
panning target pointer.
2. Turn the small right knob clockwise to
move up, or turn it counterclockwise to move
down.
3. Turn the large right knob clockwise to move
right, or turn it counterclockwise to move left.
4. To cancel the panning function and return to
your present position, press the small right
knob.
Whenthetargetpointerisplacedontrafc,the
trafcrangeandaltitudeseparationaredisplayed.The
trafcisidentiedas:
TA:TrafcAdvisory,PA:ProximityAdvisory,
TRFC:OtherTrafc
Monitoring Traffic
SeetheinformationintheSKYWATCHPilot’s
Guideregardingmonitoringtrafconthedisplayand
thecorrespondingactionstotake.
Section 3
Skywatch Interface
