A SERVICE OF

logo

381295 V1.4V 10/06
25
Setting Trigger Slope
Highlight
or .
F3 Set
or .
F4 Exit.
or . Trigger on either positive Slope or negative Slope of the chosen waveform.
Storing and Recalling Screens
The meter can store setups and waveforms to memory for later recall. Sixteen (0-15) setup
and waveform memories are available.
Storing a Screen
F3 Open the memory (Mem) menu
Sto
Rcl
Exit
F1 F2 F3 F4
Memory field (M:00) appears at the top-right corner of the display area.
Select the memory address where the screen is to be stored.
F1 Store the actual screen