A SERVICE OF

logo

Open as PDF
next previous
381295 V1.4V 10/06
19
Frequency measurement for CHA:
Plug the black test lead into the COM input jack and plug the red test lead into the CHA
input jack
Press FUNC to open the FUNCTION menu.
Scope SetUp Exit
F1 F2 F3 F4
Press F1 to open the Scope Setup menu.
SCOPE SETUP
INPUT A: INPUT B:
■ DC □ AC ■ DC □ AC
VERTICAL MODE:
□ CHA □ CHB □ A&B
HORIZONTAL MODE:
■ NORM □ ROLL
MEASUREMENTS A:
■ DCV □ ACV □ OHM □ BZ
□ HZ □ RPM □ P/W □ DTY
Set Exit
Press to Highlight Hz (□ Hz )
F3 Set
F4
Exit
Observe that Hz is now the main reading.
Holding (freezing) the display screen
You can freeze the screen (all readings and waveforms) at any time.
Default (Command Menu) Display:
A B
Mem Hold
F1 F2 F3 F4
F4 freeze the screen. Highlighted Hold appears at the bottom of the Command Menu
area.
A B
Mem Hold
F1 F2 F3 F4
F4 Resume your measurement
A B
Mem Hold
F1 F2 F3 F4