A SERVICE OF

logo

Table of the communication commands
Function
Command
Parameter
Data
Comments
Auto Focus 0
+ (NEAR)
– (FAR)
0 (STOP)
+ (TELE)
– (WIDE)
0 (STOP)
0 (OFF)
1 (1 lamp)
2
(
2 lamps
)
0
(COLOR)
1 (B&W)
+ (OPEN)
– (CLOSE)
0 (STOP)
1
(NORMAL)
AF
FO
ZO
IR
PL
CB
Command to execute the one-shot auto focus.
Focus
adjustment
Command to adjust the focus.
Zoom
adjustment
Command to adjust the Zoom.
Iris adjustment Command to adjust the Iris.
Lighting
selection
Command to select the Lighting.
Color/B&W
selection
Command to select Color/B&W.
0
AWAuto White
Balance
Command to execute the one-push auto white balance.
0
(MAIN)
1 (RGB1)
AV
Input selection Command to select the Input.
0
(OFF)
1 (ON)
PO
Pointer display Command to turn ON/OFF the Pointer display.
Command to move the video pointer.
1: To the right side
2: To the left side
3: To the upper side
4: To the lower side
5: To the upper right
6: To the upper left
7: To the lower right
8: To the lower left
PM
Pointer
movement
Transmission specifications
• Full duplex start-stop sync. mode
• Start bit : 1 bit
• Data bit : 8 bits
• Stop bit : 1 bit
• Parity bit : None
• X parameter : None
• Baud rate (Communication speed) : 9600bps
26