Effective April, 1999
IL 33-DB6-1
Page 17
For All DB-25 Breakers.
N. Use the nylon wire ties provided to secure the
HV wires to the CPT Harness and, if applicable,
the PT Wires.
O. Attach the appropriate label for the Breaker in
a clearly visible position. Three (4) labels are
included with the CPT, one (1) for 600 Volt, one
(1) for 480 Volt, one (1) for 240 Volt, and one (1)
for 208 Volt systems.
Step 11: Final Wiring and Harness Connection
A. Connect the External Harness to the Trip Unit.
NOTE: For 510 Basic Retrofit Kits, the
External Harness is the plug pictured here. It
is to be plugged into the right side of the
Trip Unit.
B.
For Kits Supplied with a PT Module Only.
Connect the PT Module to the External
Harness.
