47
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
4
Join the subjects in the shooting
area and look at the camera.
● After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the ash res, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
● Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
● To change the number of shots, after choosing [
] in step 1,
press the [
] button, press the [ ][ ] buttons to choose the
number of shots, and then press the [
] button again. [Blink
Detection] (
=
39) is only available for the nal shot.
Shooting Long Exposures (Long Shutter)
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
Special Modes for Other Purposes
Using the Face Self-Timer
Still Images
Movies
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(
=
56). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
● Follow step 1 in “Specic Scenes”
(
=
43) and choose [ ].
2
Compose the shot and press the
shutter button halfway.
● Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
3
Press the shutter button all the way
down.
● The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
● The lamp blinks and the self-timer sound
is played.
