S-7000DD
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
16
4. USING THE OPERATION PANEL
(ADVANCED OPERATIONS)
The operations described in this section should only be carried out by a technician.
4-1. Switching the 4-column display
・ The 4-column data in the display can be changed to one of the following three statuses each time the SEL key is pressed.
Stitch number display or no display Sewing speed display Counter display
・ When the sewing speed display/counter display appears, you can press the FUNC key to switch to another display.
Display mode
Four columns display
No display
Stitch number
display
ON ABCD stitch number display
ON Maximum sewing speed setting value
Sewing speed
display
ON ON Start backtack sewing speed setting value
ON Lower thread counter value
Flashing Lower thread counter warning enabled
ON ON Thread trimming counter value
ON ON Needle replacement counter value
Counter display
Flashing Flashing Needle replacement counter warning enabled
0502D 0503D 0504D
4-2. Setting the sewing speed
4-2-1. Setting the maximum sewing speed
1
Press the SEL key so that the SPEED indicator is illuminated.
・ The maximum sewing speed setting value
will appear in the four columns of the
display.
2
Press the A or B key to change the setting value.
・ When the B key is pressed, the setting
increases by 100.
・ When the A key is pressed, the setting
decreases by 100.
NOTE:
The setting range is from 220 to 4000
sti/min.
0505D
0506D
