A SERVICE OF

logo

S-7000DD
2. INSTALLATION
8
2-4-2. Other cords
For Europe specifications, Americas 220V specifications and 100 V/400 V system specifications, connect the cords according
to the respective specifications.
<Europe specifications>
(1) Filter box
(2) Screws [4 pcs]
(3) Connector
(4) CE bush plate
(5) Screws [2 pcs]
(6) CE D cord cover
(7) Screws [2 pcs]
(8) Staples [5 pcs]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
2. Insert the power plug into a
properly-grounded electrical outlet.
<
Seen from underneath table>
Leg
Control box
Green and yellow wire (ground wire)
0486D
NOTE:
Take care when tapping in the
staples (8) to make sure that they
do not pierce the cords.
Do not use extension cords,
otherwise machine operation
problems may result.