Chapter 12
64
Changing copy speed and
quality 12
You can choose from a range of quality
settings. The default setting is Normal.
To temporarily change the quality setting,
follow the instructions below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
Press Copy Options and a or b to
choose Quality.
Press OK.
d Press a or b to choose Normal, Fast
or Best. Press OK.
e Press Mono Start or Colour Start.
To change the default setting, follow the
instructions below:
a Press Menu, 3, 1.
1.Quality
b Press a or b to choose Normal, Fast
or Best. Press OK.
c Press Stop/Exit.
Enlarging or reducing the
image copied 12
You can select the following enlargement or
reduction ratios:
Custom(25-400%) allows you to enter a
ratio from 25% to 400% in 1% increments.
To enlarge or reduce the next copy follow the
instructions below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
Press
and a or b
to choose
Quality
Normal Normal is the
recommended mode
for ordinary printouts.
This produces good
copy quality with good
copy speed.
Fast Fast copy speed and
lowest ink
consumption. Use to
save time printing
documents to be proof-
read, large documents
or many copies.
Best Use best mode to copy
precise images such
as photographs. This
provides the highest
resolution and the
slowest speed.
Press
and a or b to
choose
Enlarge/Reduce
Custom(25-400%)
200%
198% 10x15cmiA4
186%10x15cmiLTR
142% A5iA4
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
83% LGLiA4
78% LGLiLTR
69% A4iA5
50%
