Sending a fax
23
5
• If the memory is full, press Stop/Exit to
stop the job. If more than one page has
been scanned, press Mono Start to send
the portion that is in the memory.
Cancelling a Broadcast in
progress 5
a Press Menu, 2, 6.
The LCD will show the fax number being
dialled.
b Press OK.
The LCD will show the job number:
XXXXXXXXX
1.Clear 2.Exit
c Press 1 to clear.
The LCD will then show the Broadcast
job number and 1.Clear 2.Exit.
d To cancel the Broadcast, press 1.
e Press Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings 5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, overseas mode and real time
transmission.
a Make sure you are in Fax mode .
b Load your document.
c Choose a setting you want to change.
Press OK.
d Choose one of the options below:
Next
1.Yes 2.No
Press 1 to change another setting.
Press 2 when you have finished
choosing your settings.
e Send the fax as usual.
