Chapter 5: CCM Commands 61
Server Command Summary (Continued)
Command Description
Server Security Specifi es the authentication mode and lock-out.
Server Set Changes CCM addresses.
Server SNMP Enables/disables SNMP processing.
Server SNMP Community Defi nes read, write and trap community strings.
Server SNMP Manager Defi nes/deletes SNMP management entities.
Server SNMP Trap Enables/disables SNMP traps.
Server SNMP Trap Destination Defi nes/deletes destinations for enabled SNMP traps.
Server SSH Enables/disables SSH session access to the CCM.
Server CLI command
The Server CLI command:
• Specifi es the CLI port, type and access character
• Enables or disables device connection from the CLI port
• Specifi es a modem initialization string
• Specifi es port history mode operations
• Specifi es a port time-out value
At least one parameter must be specifi ed.
Access right: SCON
Access level: APPLIANCEADMIN
Syntax
SERVER CLI [PORT=<port>] [TYPE=<type>] [CHAR=^<char>]
[CONNECT=ON|OFF] [HISTORY=HOLD|AUTO,CLEAR|KEEP]
[MODEMINIT=“<string>”] [TIMEOUT=<time-out>]
Server CLI Command Parameters
Parameter Description
PORT=<port> CLI port number in the range 1-8 for a CCM840 or 1-16 for a
CCM1640.
Default = current CLI port number; 1 is the manufacturing default
TYPE=<type> Terminal type to be used on CLI port. The entire type name must be
specifi ed; abbreviations are not permitted. Valid types are: ASCII,
VT52, VT100, VT102, VT220, VT320 and OFF. Specifying Type=Off
disables the CLI.
Default: ASCII
