A SERVICE OF

logo

DiskMaster
Where solutions begin
ISO 9001:2000 Certified Company
Single Hard Drive installation
The following illustrates the layout of the Web-based Configuration Tool
main screen. This page allows you to format the physical hard disks into
DiskMaster.
Click on Maintenance then Disk Utility.
Select the mode for the NAS system to partition and format disks.
Select, in the combo box, the system file (EXT2 / EXT3 / FAT32), EXT 3
is recommend. Press Format to start formatting (it may require some
times; do not perform other jobs during hard drive formatting). Now please
check that this disk is correctely mounted (check Status=mount).
Once the drive has been formatted, go to Quick Start Wizard (using
Utility) in order to finish the product setup.