Zenoah LRTZ2600 Trimmer User Manual


 
GB-4
LRTZ2600
Model LRTZ2600
Overall size (LxWxH) mm 2300 x 400 x 365
Dry weight kg 6.3
Engine Type Air-cooled 2-stroke gasoline
Model Zenoah GZ25N
Max output rpm 1.2Hp (0.9kW) at 7500min
-1
Idle speed rpm 3000±200min
-1
Displacement cm
3
25.4
Fuel
Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil)
Carburetor Walbro Diaphragm type
Spark plug NGK CMR7A
Fuel tank capacity L 0.65
Transmission Centrifugal clutch, Spiral bevel gear, Cam crank
Reduction ratio 4.0
Specifications are subject to change without notice.
2. Specification
3. Warning labels on
the machine
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
(2) Read owner’s manual before op-
erating this machine.
(3) Wear head, eye and ear protec-
tion.
(1) Warning / Attention
(4) Keep hands away from
cutting blades.
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled trimmer or if you don’t observe
the proper usage written in the manual.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER