Filter
Top Products
GB-4
HB250
Model HB250
Dimensions (LxWxH) mm 327 x 273 x 360
Dry weight (w/o tube and nozzle) kg 3.8
Fuel tank capacity liter 0.65
Engine Type Air cooled 2-cycle gasoline engine
Displacement cm
3
25.4
Carburetor Diaphragm type (Walbro)
Ignition system C.D.I.
Spark plug NGK BPMR7A
Muffler Spark arrester equipped
Operating Engine Speed rpm 2800 to 7800
Idle speed rpm 2800
Average Air Volume cu.m/min. 10.3
Max. Air Velocity m/sec. 57
Noise Level at 50 feet dB 73
Specifications are subject to change without notice.
2. Specification
3. Warning labels on
the machine
4. Symbols on
the machine
For safe operation and maintenance, symbols are carved
in relief on the machine. According to these indications,
please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Read owner’s manual before operat-
ing this machine.
Wear head, eye and ear protection.
Warning / Attention
Keep all children, bystanders and helpers 15
meters away from the machine.
Never modify your machine.
We won’t warrant the machine, if you use the
remodeled blower or if you don’t observe
the
proper usage written in the manual.
If warning label peels off or becomes soiled and
impossible to read, you should contact the
dealer from which you purchased the product
to order new labels and affix them in the required
location(s).
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER