Filter
Top Products
GB-15
G
B
HB250
3. Fit the elbow groove with discharge port projection,
turn the elbow and mount the dust bag to the main
unit.
DUST COLLECTING OPERATION
• Put the dust bag belt on the shoulder, and adjust the
length of the belt so as to permit easy operation.
• Confirm that the dust bag is not twisted, pull the throttle
trigger, and start dust collecting operation.
• Detach the dust bag from the main unit when it is full
of dust, open the dust bag fastener, and dispose of
dust.
WARNING
• Never suck in any liquid or lit cigarette.
It will lead to an electric shock or burn.
NOTE
• Never suck in large wood chips, metal, glass, small
stones or other foreign materials.
• A filled dust bag will lessen dust-collecting capacity.
It is advisable to discharge dust before it becomes
too much.
(A) Indicates Warning, Danger, and Caution.
(B) Keep work area clear of other per-sons and pets.
(C) Risk of long hair being drawn into air inlet.
(D) Wear head, eye, and hearing protection when op
erating this equipment.
(E) Do not run unit while vacuum door is unsecured.
12. Optional vacuum kit usage