Zenoah G2500TS Chainsaw User Manual


 
9. Maintenance
Make sure the engine is stopped .
DAILY CHECK POINTS
1. Air filter
Loosen the knob and remove the air cleaner cover.
Take off the filter elements and tap off attached
sawdust. When they are extremely dirty,
shakewash with gasoline. Dry them completely
before reinstalling. (MA1)
2. Oiling port
Dismount the guide bar and check the oiling port
for clogging. (MA2)
(1) Oiling port
3. Guide bar
Remove sawdust in the bar groove and the oiling
port. (MA3)
(1) Groove
(2) Oiling port
(Type: Sprocket nose)
Grease the nose sprocket from the feeding port on
the tip of the bar. (MA4)
(1) Grease port
(2) Sprocket
4. Others
Check for fuel leakage and loose fastenings or
damage to major parts, especially handle joints
and guide bar mounting. If any defects are found,
make sure to have them repaired before operating
again
WARNING
MA1
MA4
MA3
MA2
19