Filter
Top Products
18
CONTROLS
Manual Lifting Lever with Foot
Assist for the Mower Deck
The lifting lever is used to place the mower
deck in the transport position or one of the 17
different cutting height positions.
The cutting height is set by placing a pin in
the hole for the desired cutting height and the
pin is then locked on the inside (hidden in the
illustration) with the supplied cotter pin.
1. Pull the lever backward while pushing on
the foot pedal, lifting the deck to the
locked position. The deck is then raised.
2. Depress the lock handle, counter hold,
and move the lifting lever forward toward
the pin to engage the set cutting height.
The deck is then lowered.
3. The lifting lever can also be used to
temporarily adjust the cutting height,
such as when passing a minor bump in
the lawn.
Hydraulic Lift for the Mower Deck
1. Place pin in the appropriate hole for
desired cutting height, secure with cotter
pin.
2. Push switch forward on the console to
lower deck to the set cutting height.
3. Pull backwards on the switch on the
console to raise the deck for transport.
The mower deck’s lifting lever and foot pedal
BAM-11
IMPORTANT INFORMATION
In order to obtain an even cutting height it
is important that the air pressure in all
four tires is the same (16 psi).
IMPORTANT INFORMATION
Pin must be locked into a hole for
transport or mowing.
Hydraulic switch
BAM-2