Filter
Top Products
26
Safety & Decorative Labels
OPERATORS VIEW
(MODEL PLATE)
KEEP AWAY FROM ROTATING IMPELLER
AND AUGER. CONTACT WITH IMPELLER OR
AUGER CAN AMPUTATE HANDS AND FEET
.
USE CLEAN-OUT TOOL TO UNCLOG
DISCHARGE CHUTE.
DISENGAGE CLUTCH LEVERS, STOP ENGINE,
AND REMAIN BEHIND HANDLES UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING OR SERVICING MACHINE.
TO AVOID THROWN OBJECTS INJURIES,
NEVER DIRECT DISCHARGE AT BYSTANDERS.
USE EXTRA CAUTION WHEN OPERATING ON
GRAVEL SURFACES.
READ OPERATOR'S MANUAL.
1.
2.
3.
4.
5.
DANGER
CLEAN-OUT TOOL
DANGER
AVOID INJURY FROM
ROTATING AUGER -
KEEP HANDS, FEET
AND CLOTHING AWAY.
777S32066
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN
STICK TO
UNCLOG DISCHARGE CHUTE.
777S3223
6
777I22334
777I22347
CHUTE DIRECTIONAL CONTROL
CHUTE TILT DOWN
CHUTE TILT UP
1.)
INSERT IGNITION KEY AND SNAP IN
PLACE.
2.)
SET CHOKE AND THROTTLE TO FULL (ON)
POSITION. PUSH PRIMER BUTTON 3x.
3.)
ROPE START:
PULL SLOWLY UNTIL HARDER TO PULL,
THEN PULL RAPIDLY TO START. REPEAT
PRIMING IF NEEDED.
ELECTRIC START:
DO NOT USE IN RAIN. CONNECT POWER
CORD AND PUSH STARTER BUTTON.
REPEAT PRIMING IF NEEDED.
4.)
MOVE CHOKE SLOWLY TO OFF POSITION.
5.)
TO STOP ENGINE: MOVE THROTTLE TO
STOP POSITION.
STARTING INSTRUCTIONS:
PUSH BUTTON
CHUTE ROTATE
LEFT
PUSH BUTTON
CHUTE ROTATE
RIGHT
LEFT TURN
TRIGGER CONTROL
SHEAR PIN
STORAGE
GO GO
AUGER CONTROL
DRIVE CONTROL
RIGHT TURN
TRIGGER CONTROL
777D08384
777D08367
Electric Start • Single Hand Operation • 12" Impeller
9.5
HP
/ 26"
¨
D08384 AC
PO
W
ER
STEERIN
G
™
777I22363
DRIVE
AUGER
LOCK