Filter
Top Products
5
SECTION 2: CONTENTS OF HARDWARE PACK
Lay out the hardware according to the illustration below for identification purposes. Part numbers are shown in
parentheses. (Hardware pack may contain extra items which are not used on your unit.)
* The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a hard foreign object or an ice jam, the snow
thrower is designed so that the bolts may shear. Two replacement shear bolts and nuts are provided for your convenience. Store in a safe
place until needed.
A
(2)Hex Bolts (A)
(710-3180)
(4)Lock Washers (C)
(736-0119)
(2) Saddle (I)
(784-5599)
(2) Hex Bolts (B)
710-3008
B
(4) Hex Nuts (D)
(712-3010)
C
(4) Carriage Bolts (E)
(710-0262)
(4) Hex Nuts (D)
(712-3010)
(4) Lock
Washers (C)
(736-0119)
E
(2) Hex Nuts (J)
(712-0121)
(2) “Z” Fitting (R)
(746-0778)
F
(6) Hex Lock Nuts (M)
(712-3027)
(6) Hex Bolts (K)
(710-3015)
H
*
(2) Shear Bolts
(710-0890A)
(712-0429)
(2) Hex Lock Nuts
(3) Chute Flange Keepers
(Not Shown) (731-0851)
G
Cupped Washer (N)
(736-0242)
(2) Flat Washers (S)
(736-0185)
Hairpin Clip (T)
(714-0104)
(2) Hex Nuts (D)
(712-3010)
D
(2) Hex
Bolts (G)
(710-3015)
(2) Hex Lock Nuts (H)
(712-3027)
(4) Self-Tapping
Screws (F)
(710-0599)