Filter
Top Products
18
SHIFT LEVER CABLE ADJUSTMENT (Models 380 - 389 Only)
Periodic adjustment of the six speed shift cable may be required due to normal wear on the cable.
Adjustment is needed if all six speeds do not work.
The adjustable cable bracket is located on the left side of the mower, beside the engine. Follow steps 1
through 7 to adjust the shift lever.
Step 1. Start engine.
Step 2. Place speed control in the sixth speed position.
Step 3. Stop engine.
Step 4. Disconnect the spark plug wire and ground it.
Step 5. Loosen hex nut (A) which secures the adjustable cable bracket.
Step 6. Push back on the adjustable cable bracket.
Step 7. Tighten hex nut (A).
Bottom View
Speed Control Lever
Hex Nut (A)
Adjustable Cable Bracket
PUSH