Filter
Top Products
– 25 –
6. Check the muffler screen and spark arrester.
Replace them if damaged.
7. Install the spark arrester.
NOTE:
Align the spark arrester projection with the hole in the
muffler pipe.
1 Projection
2 Hole
8. Install the muffler screen.
9. Install the cover.
711-080
q
w
711-081
788-016a
711-079
q
711-075
4. Remove the spark arrester.
1 Spark arrester
5. Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
cC
When cleaning, use the wire brush lightly to avoid
damaging or scratching of the muffler screen and
spark arrester.
711-078
3. Use a flathead screw driver to pry the spark
arrester out from the muffler.
7CF-9-10-b 3/9/05 10:35 AM Page 25