Filter
Top Products
– 23 –
700-133
3
3
6
4
700-006a
q
AE01174
ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up
the engine for several minutes.
Then stop the engine.
2. Remove the rubber cap 1 on the bottom.
3. Place an oil pan under the engine . Remove the
drain bolt 2.
4. Open the oil filler cover 3 as shown and remove
the oil filler cap 4 so that the oil can be complete-
ly drained.
5. Check the drain bolt , gasket 5, oil filler cap and O-
ring 6.
If damaged, replace.
6. Reinstall the oil drain bolt.
7. Add engine oil to the upper level.
1Upper level
700-130
1
700-132
2
5
Drain Bolt Torque:
17 N•m (1.7 kgf•m, 12 lbf•ft)
7CF-9-10-b 3/9/05 10:35 AM Page 23