Filter
Top Products
11
Critical Application
Thread
Locker
Torque Range
(ft-lbs)
Wheel motor bolts (Securing motor to support) Loctite 2760 40-50
Clutch to engine shaft Loctite 2760 50-55
Wheel hub to wheel motor N/A 175-225
Wheel lug nuts N/A 80-90
Split Hub (Spindle & Drive) (Gr 8) N/A 13-17
Torque Specifications
2 Specifications
Engine
• See your engine owner’s manual
• RPM: Full speed 3600 +/- 50 RPM (no load) / Idle: 1550 RPM
Electrical System
• Charging System: Internal stator coil
• Battery Type: Maintenance free
• Battery Voltage: 12 Volts
• Fuses: Two, 20 amp blade type
Fuel System
• Capacity: 5.6 Gal.
• Type of Fuel: Unleaded regular gasoline, minimum 85 octane. Do not use gasoline containing more
than 10% ethanol. Do not mix oil with gasoline.
• Fuel Filter: In line
• Fuel shut off: On, Off located on fuel tank
Safety Interlock System
• PTO switch must be disengaged, brake engaged and the control handles in the neutral and locked
position to start the engine.
• Operator must have feet on the platform to engage the PTO and brake off or engine will stop.
Drive System:
• Two Hydro Gear 12cc variable displacement piston pumps w/fans
• Two Hydro Gear 15 cu in. wheel motors
Hydro Oil System
• Hydro Oil: fully SYNTHETIC motor oil: Mobil-1 15W-50
• Hydro Filter: Spin-on, 25 micron, no bypass / PN 34490002
• Total Capacity: 3 qts
• Tank Fill Level: Fill until fluid comes from fill port.