Filter
Top Products
5
34
SAFETY INSTRUCTIONS (continued)
Safety of the operator is one of the main concerns in designing and developing a new piece of equipment.
Designers and manufacturers build in as many safety features as possible. However, every year many
accidents occur which could have been avoided by a few seconds of thought and a more careful approach to
handling equipment. You, the operator, can avoid many accidents by observing the following precautions in
this section. To avoid personal injury, study the following precautions and insist those working with you, or for
you, follow them.
In order to provide a better view, certain photographs or illustrations in this manual may show an assembly
with a safety shield removed. However, equipment should never be operated in this condition. Keep all shields
in place. If shield removal becomes necessary for repairs, replace the shield prior to use.
To prevent injury or death, use a tractor equipped with a Roll-Over Protective System (ROPS). Do not paint
over, remove or deface any safety signs or warning signs on your equipment. Observe all safety signs and
practice the instruction on them.
Never exceed the limits of a piece of machinery. If its ability to do a job, or to do so safely, is in question –
DON’T TRY IT.
Do not modify the equipment in any way. Unauthorized modification may impair the function and/or safety and
could affect the life of the equipment.
In addition to the design and configuration of this implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also
to Safety Messages and Operation Instructions in each of the appropriate sections of the Tractor and Cutter
Manuals. Pay close attention to the Safety Signs affixed to the Tractor and the Cutter.
Replace any CAUTION, WARNING, DANGER or instruction safety sign that is not readable or is missing.
Location of such safety signs is indicated in this booklet.
Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating this
equipment. Consult your doctor about operating this machine while taking prescription medications.
Review the safety instructions with all users annually.
This equipment is dangerous to children and persons unfamiliar with its operation. The operator should be a
responsible adult familiar with farm machinery and trained in this equipment’s operations. Do not allow
persons to operate or assemble this unit until they have read this manual and have developed a
thorough understanding of the safety precautions and of how it works.
EQUIPMENT SAFETY GUIDELINES
REF. PART NO.
NO. NO. DESCRIPTION REQ'D.
1 650351 Deck Weldment, SDM40-60 1
2 650440 Gearbox - Comer 135.800 1
3 2503175 Bolt, Hex
5
/
8
” - 11 NC x 1
3
/
4
”4
4 2500083 Nut, Hex Vibration Proof
5
/
8
” - 11 NC 4
5 650395 Blade Holder Weldment 1
6 650425 Blade, Cutter SDM40-60/MDM70-60 2
7 650426 Blade Bolt, 1
1
/
8
”2
8 650427 Lock, Washer, 1
1
/
8
” HD 2
9 650428 Nut, Hex Jam, 1
1
/
8
” - 12 UNF Gr. 8 2
10 650378 Sidebar, Toplink “A” 2
11 650379 Crossbar, Toplink “A” 1
12 650382 Linkage Lift Strap 2
13 650383 Tie Link, Toplink “A” 2
14 650384 Spacer 1
15 2503258 Bolt, Hex
3
/
4
” - 10 x 2.25 Gr. 5 2
16 2500037 Nut, Hex Nylock
3
/
4
” - 10 NC 2
17 590108 AK-578 Draw Pin 2
18 2503066 Bolt, Hex Head
5
/
8
” - 11 NC x 4” 1
19 2503154 Bolt, Hex
5
/
8
” - 11 NC x 1
1
/
2
”6
20 2503152 Bolt, Hex Head
5
/
8
” - 11 NC x 2” 1
21 2500041 Nut, Hex Nylock
5
/
8
” - 11 NC 4
22 650416 A-Frame Weldment Tail Wheel 1
23 650412 Yoke Weldment 1
24 650480 Wheel Assembly - SDM40-60/72 Cutters 1
25 650386 Spindle Tube 1
26 2504179 Roll Pin
1
/
2
” x 2” 1
27 2503256 Bolt,
3
/
4
” - 10 NC x 7
1
/
2
” HH Gr. 5 1
28 2500002 Nut, Hex
3
/
4
” - 10 NC 1
29 2502001 Washer, Springlock
3
/
4
”1
30 650387 Bar, Tail Wheel Adj. 1
31 2502007 Washer, Springlock
5
/
8
”4
32 2500013 Nut, Hex
5
/
8
” - 11 NC 4
33 650460 PTO Assembly, SDM40-60 1
34 2503012 Bolt, Hex
1
/
2
” - 13 NC x 3” Grade 2 1
35 2502002 Washer, Springlock
1
/
2
”1
36 2500003 Nut, Hex
1
/
2
” - 13 NC 1
37 2504201 Snap Ring 1
3
/
8
” Dia. SH-137 1
38 650451 Castle Nut M24 x 2 1
39 650468 Cotter Pin 5 x 50 1
40 650452 Bolt Washer 25 x 44 x 4 1
41 2504049 Drive Zerk
5
/
16
”1
42 101101 Safety Sign - Warning (540 RPM) 1
43 101100 Safety Sign - Danger (Rotating Blades) 1
44 101103 Safety Sign - Danger (Keep Away) SW101 1
45 101157 Safety Sign - Warning (Prevent Serious Injury) M100 1
SDM40-72 (6’ CUTTER) PA RTS LIST
1 650601 Deck Weldment, SDM40-72 1
6 650430 Blade, Cutter SDM40-72/MDM70-72 2
12 650632 Linkage Lift Strap SDM40-72 2
33 650465 PTO Assembly, SDM40-72 1
SDM40-60 (5’ CUTTER) PA RTS LIST
and parts common to all models