Filter
Top Products
4 Introduction
MAN0003 (Rev. 11/30/2006)
GENERAL INFORMATION
The purpose of this manual is to assist you in operating
and maintaining your tiller. Read it carefully. It furnishes
information and instructions that will help you achieve
years of dependable performance. These instructions
have been compiled from extensive field experience
and engineering data. Some information may be gen-
eral in nature due to unknown and varying operating
conditions. However, through experience and these
instructions, you should be able to develop procedures
suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left direction. These are determined by standing
behind the equipment facing the direction of forward
travel.
SPECIFICATIONS
TL52 TL73 TL84
Dual Direct Dual Direct Dual Direct
Motor Char-Lynn 2000 - 18.7 Char-Lynn 2000 - 18.7 Ross ME180405 AAAB
Maximum Pressure 3300 psi (228 bars) 3300 psi (228 bars) 5000 psi (245 bars)
Working Depth 0 - 6 Inches 0 - 6 Inches 0 - 6 Inches
Working Width 52 Inches (1321 mm) 73 Inches (1854 mm) 84 Inches (2134 mm)
Overall Width 60 Inches (1524 mm) 86 Inches (2184 mm) 97 Inches (2462 mm)
Overall Length 44 Inches (1118 mm) 44 Inches (1118 mm) 44 Inches (1118 mm)
Tines 28 36 40
RPM @12 gpm (46 lpm)
148 rpm
@15 gpm (76 lpm)
247 rpm
@20 gpm (76 lpm)
247 rpm
@15 gpm (57 lpm)
185 rpm
@25 gpm (95 lpm)
309 rpm
@25 gpm (95 lpm)
432 rpm
@18 gpm (69 lpm)
22 rpm
@32 gpm (122 lpm)
395 rpm
@32 gpm (122 lpm)
432 rpm
@40 gpm (152 lpm)
540 rpm