Filter
Top Products
4 Introduction
MAN0813 (3/17/2010)
SPECIFICATIONS
GENERAL INFORMATION
Some illustrations in this manual show the
equipment with safety shields removed to provide
a better view. This equipment should never be
operated with any necessary safety shielding
removed.
The purpose of this manual is to assist you in operating
and maintaining your rotary tiller. Read it carefully. It
furnishes information and instructions that will help you
achieve years of dependable performance. These
instructions have been compiled from extensive field
experience and engineering data. Some information
may be general in nature due to unknown and varying
operating conditions. However, through experience
and these instructions, you should be able to develop
procedures suitable to your particular situation.
The illustrations and data used in this manual were cur-
rent at the time of printing but, due to possible inline
production changes, your machine may vary slightly in
detail. We reserve the right to redesign and change the
machines as may be necessary without notification.
Throughout this manual, references are made to right
and left directions. These are determined by standing
behind the equipment, facing the direction of the for-
ward travel.
TC60 and TCR60
TC68 and TCR68 TC74 and TCR74
Tilling Width 60" 68" 74"
Maximum Tilling Depth 7-1/2" 7-1/2" 7-1/2"
Operating Weight 597 lbs/604 lbs (R) 634 lbs/641 lbs (R) 665 lbs/672 lbs (R)
Rotor Swing Diameter 17-1/2" 17-1/2" 17-1/2"
Number of Blade Flanges 7 8 9
Number of Blades 42 48 54
Drive Type #80 Chain #80 Chain #80 Chain
Tractor PTO Speed 540 RPM 540 RPM 540 RPM
Rotor Speed 240 RPM 240 RPM 240 RPM
Tractor Hitch Limited Category 1 &
Category1
Limited Category 1 &
Category1
Limited Category 1 &
Category1
Tractor Horsepower Up to 45 HP UP to 45 HP Up to 45 HP
Skid Shoe Adjustments 5 x 1" 5 x 1" 5 x 1"
Side-Shift Distance 15-1/2" 19-1/2" 22-1/2"
Gearbox Oil Capacity 1.2 QT SAE 80W-90 1.2 QT SAE 80W-90 1.2 QT SAE 80W-90
Chain Case Oil Capacity .78 QT SAE #00 * .78 QT SAE #00 * .78 QT SAE #00 *
* Chain case #00 grease is factory installed
(Rev. 6/7/2011)