Filter
Top Products
Hydraulic Installation 11
MAN0788 (1/16/2009)
58025 Hose Kit
Install Hose Brackets
1. Remove right rear rockshaft housing cap screw
and attach hose guide (5) as shown in Figure 13.
Secure using tractor hardware.
2. Attach hose support (4) to right side of transmis-
sion housing using cap screw (6) and lock washer
(7), Figure 14.
3. Tighten all cap screws to specifications given on
the Bolt Torque Chart, Page 16.
4. Route hoses behind hose guide and connect
hydraulic hoses to tractor hydraulic couplers as
shown in Figure 13.
4. 54299 Hose support bracket
5. 54305 Hose guide bracket
6. 64084 M14 x 1.5P x 30 mm Cap screw
7. 855 1/2 Lock washer
Figure 13. Hose Guide Installed
Figure 14. Hose Support Bracket
DP6
A
B
D
C
5
CM1586
4