Filter
Top Products
Assembly 31
MAN0180 (Rev. 1/7/2005)
Install Quick Hitch Kit (Optional)
NOTE: Figure 38 shows RM660, other models use the
same assembly instructions.
NOTE: This kit allows mower to fit only Cat. 1 standard
ASAE quick hitch.
Figure 38. Quick Hitch Kit Installation
1. Attach offset link (1) to mounting pins, using 7/8"
sleeve (8) and flat washer (9). Do not tighten
hardware.
2. Attach upper end of offset link to pivot link, using
flat washer (5), sleeves (6 & 10), flange lock nut
(7), and 1/2" x 4-3/4" cap screw.
3.