Filter
Top Products
10 Installation
MAN0258 (Rev. 12/14/2007)
Figure 9. Belt Shield Installation
DEALER CHECK LIST
PRE-DELIVER CHECK LIST
Inspect the equipment thoroughly after assembly to
make sure it is properly set up before delivering it to the
customer.
The following check lists are a reminder of points to
inspect. Check off each item as it is found satisfactory
or after proper adjustment is made.
___ Check that shields and guards are properly
installed and in good condition. Replace if
damaged.
___ Check all bolts to be sure they are properly
torqued.
___ Check that all cotter pins and safety pins are
properly installed. Replace if damaged.
___ Check and grease all lubrication points.
DELIVERY CHECK LIST
___ Show customer how to make adjustments and
select proper PTO speed.
___ Instruct customer how to lubricate and explain
importance of lubrication.
___ Present Operator's Manual and request that
customer and all operators read it before oper-
ating equipment. Point out the manual safety
rules, explain their meanings and emphasize
the increased safety hazards that exist when
safety rules are not followed.
___ Make customer aware of optional equipment
available so that customer can make proper
choices as required.
Point out all guards and shields. Explain their
importance and the safety hazards that exist when not
kept in place and in good condition.
NOTICE
■ Operating vacuum attachment with ROPS/
enclosure requires that the deck height adjustment
handle be folded down whenever possible. Failure
to fold down handle may result in damage to the
handle.
CD6274-2
33
32
34
31
57
58
33
34