Filter
Top Products
Parts 19
29929 (Rev. 3/28/2008)
SPINDLE ASSEMBLY
NOTE: When difficulty is experienced with a
mower spindle, time and trouble will be saved
by buying a complete new assembly.
NOTE: Repair shaft (9) and repair sleeve (3) do
not have a hole drilled in them for pin (4). After
new parts have been assembled and proper bearing
adjustment obtained, drill a 3/16 diameter hole
through sleeve and shaft. Drive in Sel-lock pin to
hold proper bearing adjustment.
REF PART QTY DESCRIPTION
1 4116 1 Spindle
2 5089 2 Seal
3 41141Sleeve
4 41151Pin
5 4107 2 Bearing cone
6 4117 1 Housing with cups
7 4106 2 Bearing cup
8 1972 1 Grease fitting
9 4105 1 Spindle shaft
10 4110 1 Shoulder washer
11 6950KT 1 20-1/4 Medium suction blade
11 26559KT 1 20-1/4 Low suction blade
12 10658 1 5/8 NC x 1-1/2 Nylok bolt
13 3490 1 Blade bolt wrench
14 2974 1 Spindle lock wrench
16 10635 2 5/8 Cup washer
17 692 1 5/8 Flat washer
18 1015825 1 Blade bolt and washers, complete