Filter
Top Products
Dealer Check List 15
29900 (Rev. 3/14/2008)
DEALER CHECK LISTS
PRE-DELIVERY CHECK LIST
(DEALER’S RESPONSIBILITY)
Inspect the equipment thoroughly after assembly to
ensure it is set up properly before delivering it to the
customer.
The following check lists are a reminder of points to
inspect. Check off each item as it is found satisfactory
or after proper adjustment is made.
___ Check that all safety decals are installed and in
good condition. Replace if damaged.
___ Check that shields and guards are properly
installed and in good condition. Replace if dam-
aged.
___ Properly attach implement to tractor and make all
necessary adjustments.
___ Check all bolts to be sure they are tight.
___ Check and grease all lubrication points as identi-
fied in “Service”.
___ Check that blades have been properly installed.
DELIVERY CHECK
(DEALER’S RESPONSIBILITY)
___ Instruct customer how to lubricate and explain
importance of lubrication.
___ Point out the safety decals. Explain their meaning
and the need to keep them in place and in good
condition. Emphasize the increased safety haz-
ards when instructions are not followed.
___ Present Operator's Manual and request that cus-
tomer and all operators read it before operating
equipment. Point out the manual safety rules,
explain their meanings and emphasize the
increased safety hazards that exist when safety
rules are not followed.
___ Show customer the safe, proper procedures to be
used when mounting, dismounting, and storing
equipment.
___ Point out all guards and shields. Explain their
importance and the safety hazards that exist
when not kept in place and in good condition.