18
Step 8. Using a 3/8” socket, remove three hex
screws holding the baffle to the deck.
Step 9. Tilt the transmission forward and loosen
the idler pulley bolt and locknut 1/2 turn
using two 7/16” wrenches.
Step 10. Using a pair of pliers, pull back and rotate
belt keeper bracket from the slot on idler
pulley.
Step 11. Slide the belt out from between the Belt
Keeper Bracket and the idler pulley.
Step 12. Pivot baffle towards the rear of the mower.
Hex Screw
Hex Screw
Hex
Screw
Transmission
Belt Keeper
Bracket
Idler Pulley
Belt
Idler Pulley
Bracket
Transmission
Pulley
Bolt and
Locknut
Baffle