Filter
Top Products
OPERATING INSTRUCTIONS
• Using a garden hose, fill the spa with water to the
water line indicator mark on the skimmer frame.
• At the house service panel, turn on the circuit breaker
or switch that controls the electrical service to your
spa. (Make sure there is no other appliance on that
circuit.)
• Open the skirt door giving access to the System
Control Module.
• Your spa is provided with a ground fault circuit inter-
rupter (GFCI). At initial start-up and at least once a
month thereafter, with power on, push the test button
located on the System Control Module. The reset
button should pop out. Push this button in to reset. If
the interrupter fails to operate in this manner, there is
a ground current flowing or a device malfunctioning,
indicating the possibility of electric shock. Turn off
power and do not use the spa until the source of
the breakdown has been identified and corrected.
Now that your Razza Plus spa is in place, you are probably eager to take advantage of its unique designed-in
features—especially the patented Jacuzzi Whirlpool Bath hydromassage performance. Besides being a beautiful
addition to your indoor decor or outdoor landscaping, your Jacuzzi
®
whirlpool spa will provide you with the ultimate
in spa pleasure.
Basic Control Set-Up
The control set-up on your Razza Plus spa is designed to give you fingertip control of the heater, air induction, light
and whirlpool, filter, and blower systems of your unit from inside or outside your spa. Follow the basic control set-
up described below to familiarize yourself with the several functions of the control panels located on the top of the spa.
CAUTION
Do not turn on power to the spa unless it is filled with water to the normal water level. (See water line indicator
mark on skimmer frame.) When the power is on, the built-in timer may activate the system even though the
SYSTEM is turned off at the control panel. If the spa’s motor/pump is actuated when there is not sufficient
water in the unit, the circulation pump and heater could be irreparably damaged. Not heeding this caution will
nullify the warranty. In addition to damaging the unit, operating the spa with insufficient water could cause
a fire.
6
OPERATION