ASSEMBLY
GAUGE WHEEL _ \
MOUNTING
BRACKET
3/8-16
LOCKHUT
3/8 FLAT WASHER "_' _P' _1 SHOULDER BOLT
GAUGE WHEEL _\ _"
FIG. 5
INSTALL MULCHER PLATE
(See Figs. 6 & 7)
• Install two latch hooks to mulcher plate using screw,
washer, lock washer, and weld nut as shown.
NOTE: Pre-assemble weld nut to latch hook by inserting
weld nut from the top with hook pointing down.
• Tighten hardware securely.
• Raise and hold deflector shield in updght position.
• Place front of mulcher plate over front of mower deck
opening and slide into place, as shown.
• Hook front latch into hole on front of mower deck.
• Hook rear latch into hole on back of mower deck.
CAUTION: Do not remove discharge
guard from mower. Raise and hold
guard when attaching mulcher plate
and allow it to rest on plate while in
operation.
WELD NUT FROM THE TOP HOOK POINTS DOWN
LOCK
WELD WASHER
NUT.
\
LATCH
HOOK"_-..
HOOK
WASHER
MULCHER
PLATE
LOCK
WASHER
WASHER
-_SCREW
FIG. 6
WELD
NUT
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in a safe place
Your mower is now ready for discharging or installation c
optional grass catcher accessory.
DEFLECTOR
LATCH
HOOKS
FIG. 7
,/CHECKLIST
BEFORE YOU OPERATE AND ENJOY YOUR NEt
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIV
THE BEST PERFORMANCE AND SA TISFA C TION FRO_
THIS QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIST:
,/ All assembly instructions have been completed.
,/ No remaining loose parts in carton.
,/ Battery is propedy prepared and charged. (Minimul
1 hour at 6 amps).
,/ Seat is adjusted comfortably and tightened securel_
,/ All tires are propedy inflated. (For shipping purpose:
the tires were ovednflated at the factory).
/ Be sure mower deck is properly leveled side-to-sid_
front-to-rear for best cutting results. (Tires must t:
properly inflated for leveling).
,/ Check mower and drive belts. Be sure they are rout_
properly around pulleys and inside all belt I_eepers:
,/ Check wiring. See that aftconnections are still secu
and wires are properly clamped.
WHILE LEARNING HOWTO USE YOUR TRACTOR, PP
EXTRA ATTENTION TO THE FOLLOWING IMPORTAh
ITEMS:
,/ Engine oil is at proper level.
J Fue_tank isfilled with fresh, clean, regular unleadc
gasoline.
/ Become familiar with all controls - their location at
function. Operate them before you start the engin_
,/ Be sure brake system is in safe operating conditior
8