Filter
Top Products
SERVICE AND ADJUSTMENTS
POSITIVE TERMINAL NEGATIVE TERMINAL
BATTERY
POSITIVE TERMINAL NEGATIVETERMINAL
FIG. 31
TO REPLACE HEADLIGHT BULB
• Raise hood.
• Pull bulb holder out of the hole in the backside of the
grill.
• Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill.
• Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running, or prevent it from starting.
• Check wiring. See electrical wiring diagram in the
Repair Parts section of this manual.
TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse, The
fuse holder is located behind the dash.
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 32)
Raise hood.
Unsnap headlight wire connector.
Stand infront of tractor. Grasp hoodat sides, tilttoward
engine and liftoff of tractor.
• To replace, reverse above procedures.
HOOD
HEADLIGHT
WIRE
CONNECTOR
FIG, 32
23