Filter
Top Products
5
For normal homeowner use, the muf fler a nd
spark arresting screen will not require any
service.
After 5 0 hours of use, we recommend that your
muffler be serviced or replaced by your autho-
rize d servi ce dealer.
ASSEM BLY
WARNING: If received asse mbled,
repeat allsteps toensureyour unit isproperly
asse mbled and all fasteners are secure.
Examine parts for dam age. Do not use dam-
aged parts.
NOTE: If you need assistance or find parts
missing or damaged, call 1-800-554-6723.
It is normal for the fuel filter to rattle in the
empty fuel tank.
Finding fuelor oil residue onmuffler is nor m al
due to carburetor adjustments and testing
done by the manufacturer.
ADJUSTING THE HANDLE
WARNING: Whenadjust ing the assist
handle, besure itremains abovethe safety label
and below the mark or arrow on the shaft.
1. Loosen wing nut on handle.
2. Rotate th e handle on the shaft to an upright
positi on; retighten wing nut.
ATTACHING SHIELD
WARNING: The shield m ust be prop-
erly installed.The sh i eldprovi de s partial p rotec-
tion fromthe risk of thrown objects t o the opera-
tor and others and is equipped w ith a line limiter
blade which cuts excess line to the proper
length. The lin e limiter blade (on underside of
shield) is sharp and can cu t you.
For proper orientation of shield, see KNOW
YOUR TRIMMER illu stration in OPERATI ON
section.
1. Remove wing nut from shield.
2. Insert bracket into slot as shown.
3. Pivo t shield untilbolt passe s through holein
bracket.
4. Secur ely tighten wing nut onto bolt.
Slot
Shield
Wing
Nut
Bracket
Line Limiter
Blade
PIVOT