Filter
Top Products
5
Opening for
Front
Locking Tab
Shield
Cutting Head
Motor Housing
3. Ke ep f rontlocking tabin themotor h ousing.
Cutting Head
Shield
4. Push shield toward motor housing until
rear locking tabs snap into rear notches.
An audible snap must be
heard. Ensure
the cutting head remains free to rotate
and the line is not caught between the
shield and the motor housing.
Shield
OPERATION
KNOW YOUR TRIMMER
READ THI SINSTRUCTION M ANUALAND SAFETYRULESBEFOREOPERATINGYOURUNIT.
Compare the illustrations with your unit to f amiliarize yourself with the location of the various controls
and adjustments. Save this manual for future reference.
Cord
Retainer
Recessed
Plug
Trigger Switch
Assist Handle
Twist and Edge Button
Motor Housing
Edge Guide
Line Limiter Blade
Trimmer Head
with 0.065 inch
Trimmer Line
Debris Shield
Air
Vents
Locking
Sleeve
Assembly
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethet riggerswitchtooperatethe
unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds the cutting line
and rotates during operation.
TWIST AND EDGE BUTTON
TheTWIST AND EDGE BUTTON is used to
twist the lower portion ofthe unit into an edg-
ing position.
EDGE GUID E
TheEDGEGUIDEprotects theunitfromcon-
tacting the ground during edging.